Columbia Plywood Amends Permit In NC, Hopes To Add AirBurners FireBox

The North Carolina Department of Environmental Quality’s Division of Air Quality (DAQ) is accepting public comment on a draft air quality permit modification for Columbia Plywood Corp.—Columbia Carolina Division, the company’s plywood manufacturing facility in Old Fort, NC.

If approved, the modification would allow Columbia Plywood to install an air curtain incinerator unit from AirBurners at the facility to burn its wood waste for disposal—increasing potential emissions thresholds, thus requiring a Title V air quality permit.

AirBurners incinerators, branded as FireBox, were designed principally as a pollution control device for open burning. The primary objective of an air curtain machine is to reduce the particulate matter, which results from burning clean wood waste. Using a technology called “air curtain,” the smoke particles are trapped and reburned, reducing them to an acceptable limit per EPA guidelines.

Clean wood waste is loaded into the FireBox and an accelerant is used to ignite the pile. The air curtain is not engaged until the fire has grown in strength, usually after 15 to 20 minutes. Once engaged, the air curtain then runs at a steady state throughout the burn operation, and the waste wood is loaded at a rate consistent with the rate of burn. The smallest machine offered by AirBurners burns at a rate of 1-2 tons per hour, with the largest burning in excess of 10 tons per hour.

All public comments made to the DAQ before September 11, 2025 will be considered before a final decision on the proposed permit is made.

Latest news

University Of Georgia Researchers Will Reengineer Poplar

A multidisciplinary team of researchers at the University of Georgia and two partner institutions have been awarded a $15.8 million grant over five years from the U.S. Dept. of Energy to reengineer poplar trees to be used as a sustainable energy source…

read more

Rotochopper Adds Chad Angeli To Newly Created Executive Role

Chad Angeli has been announced as the newest member to the Rotochopper executive team in the newly created role of Vice President of Customer Experience. In this role, Angeli will lead the sales, marketing, and customer service functions, strengthening the Rotochopper brand and aligning customer touchpoints. As a strategic partner to the CEO, he will develop and implement strategies that lead to continued…

read more

IEP Technologies Introduces IsoDisc

Industrial Explosion Protection (IEP) Technologies provides a complete range of cost-effective industrial explosion protection solutions, and have recently introduced the IsoDisc for passive isolation. The IsoDisc is an effective, self-actuating and self-resettable device providing explosion isolation to application handling combustible dusts such as air aspiration inlets of…

read more

Find Us On Social

Subscribe to Our Newsletter

Wood Bioenergy News Online hits the inboxes of subscribers in the wood-to-energy sectors.

Subscribe/Renew

Wood Bioenergy is published and delivered worldwide 6 times per year. Free to qualified readers in the U.S. Subscribers outside the U.S. are asked to pay a small fee.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative.