Columbia Plywood Amends Permit In NC, Hopes To Add AirBurners FireBox
If approved, the modification would allow Columbia Plywood to install an air curtain incinerator unit from AirBurners at the facility to burn its wood waste for disposal—increasing potential emissions thresholds, thus requiring a Title V air quality permit.
AirBurners incinerators, branded as FireBox, were designed principally as a pollution control device for open burning. The primary objective of an air curtain machine is to reduce the particulate matter, which results from burning clean wood waste. Using a technology called “air curtain,” the smoke particles are trapped and reburned, reducing them to an acceptable limit per EPA guidelines.
Clean wood waste is loaded into the FireBox and an accelerant is used to ignite the pile. The air curtain is not engaged until the fire has grown in strength, usually after 15 to 20 minutes. Once engaged, the air curtain then runs at a steady state throughout the burn operation, and the waste wood is loaded at a rate consistent with the rate of burn. The smallest machine offered by AirBurners burns at a rate of 1-2 tons per hour, with the largest burning in excess of 10 tons per hour.
All public comments made to the DAQ before September 11, 2025 will be considered before a final decision on the proposed permit is made.
Latest news
Enviva Continues Growth Expansion
Industrial wood pellet producer Enviva reported several operational developments in its second quarter statement. John Keppler, chairman and CEO, noted the company recently commenced construction of its plant in Epes, Ala.; is making swift progress on plans to start construction of a new plant in Bond, Miss.; and has recently filed for a permit for expansion of its Ahoskie, NC…
Bob Vermeer Guided Family Operation
Robert “Bob” Lee Vermeer, who drove the growth of Vermeer Corp. and its line of whole tree chippers and other wood processing equipment, died on August 17. He was 78. His vibrant love of people, passion for Christ, distinct laugh and desire to put others first is what those who knew him will remember most…
Peak Renewables Plans Alabama Wood Pellet Facility
Canadian-based Peak Renewables plans to build a 180,000 metric tons per year wood pellet mill in Dothan, Ala. The $30 million project will utilize residuals from Rex Lumber sawmills in the area…
Wrapping It Up: Wood Bio Conference
EDITOR’S NOTE: This is the third of three parts in the coverage of the Wood Bioenergy Conference & Expo held March 29-30, 2022 at the Omni Hotel at CNN Center and hosted by Wood Bioenergy magazine. Part one in the June issue focused on the keynote talks from producer and consultant personnel. Part two in the August issue highlighted several presentations delivered by representatives of equipment and technologies companies. The next Wood Bioenergy Conference & Expo will be held March 12-13, 2024 at the Omni Hotel at CNN Center in Atlanta, Ga…
Find Us On Social
Subscribe to Our Newsletter
Wood Bioenergy News Online hits the inboxes of subscribers in the wood-to-energy sectors.
Subscribe/Renew
Wood Bioenergy is published and delivered worldwide 6 times per year. Free to qualified readers in the U.S. Subscribers outside the U.S. are asked to pay a small fee.
Advertise
Complete the online form so we can direct you to the appropriate Sales Representative.