Columbia Plywood Amends Permit In NC, Hopes To Add AirBurners FireBox
If approved, the modification would allow Columbia Plywood to install an air curtain incinerator unit from AirBurners at the facility to burn its wood waste for disposal—increasing potential emissions thresholds, thus requiring a Title V air quality permit.
AirBurners incinerators, branded as FireBox, were designed principally as a pollution control device for open burning. The primary objective of an air curtain machine is to reduce the particulate matter, which results from burning clean wood waste. Using a technology called “air curtain,” the smoke particles are trapped and reburned, reducing them to an acceptable limit per EPA guidelines.
Clean wood waste is loaded into the FireBox and an accelerant is used to ignite the pile. The air curtain is not engaged until the fire has grown in strength, usually after 15 to 20 minutes. Once engaged, the air curtain then runs at a steady state throughout the burn operation, and the waste wood is loaded at a rate consistent with the rate of burn. The smallest machine offered by AirBurners burns at a rate of 1-2 tons per hour, with the largest burning in excess of 10 tons per hour.
All public comments made to the DAQ before September 11, 2025 will be considered before a final decision on the proposed permit is made.
Latest news
Drax Idling Operations In Arkansas
Drax Idling Operations In ArkansasDrax has made the decision to cease operations and idle pellet plant facilities in Leola and Russellville, Ark. The plants will cease operations and idle beginning November 1, 2025; operations at other U.S. sites will remain...
American Loggers Council Letter Urges Trump To Act Quickly
American Loggers Council Letter Urges Trump To Act QuicklyAmerican Loggers Council along with American Biomass Energy Assn. and Forest Landowners Assn. has circulated a “stakeholder” letter addressed to President Trump and other key policymakers, and invited...
Evergreen Engineering Celebrates 40th Anniversary
Evergreen Engineering Celebrates 40th Anniversary Evergreen Engineering, Inc. was incorporated in 1985 with headquarters in Eugene, Ore., originally served mainly the forest products industries (wood products and pulp & paper) that used to be predominant in the...
Scott Bax Joins Enviva As Executive VP & COO
Scott Bax Joins Enviva As Executive VP & COOAfter announcing its emergence from Chapter 11 bankruptcy on December 6, 2024, 20 years after the company’s founding, Enviva has added Soctt Bax to its Executive Team, making him Executive Vice President and Chief Operating...
Find Us On Social
Subscribe to Our Newsletter
Wood Bioenergy News Online hits the inboxes of subscribers in the wood-to-energy sectors.
Subscribe/Renew
Wood Bioenergy is published and delivered worldwide 6 times per year. Free to qualified readers in the U.S. Subscribers outside the U.S. are asked to pay a small fee.
Advertise
Complete the online form so we can direct you to the appropriate Sales Representative.